Odeon, Before You Begin, Ordering Information, 2004

ODEON

INSTALLATION INSTRUCTIONS

P/S-

VITREOUS CHINA P/S-TRAP TOILET

P-TRAP 180mm K-8711T S-TRAP 255mm K-8753T

S-TRAP 305mm K-8766T

BEFORE YOU BEGIN

Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation . This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.

All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time withoutnotice.

These instructions contain important care, cleaning, and warranty information-please leave instructions for the consumer.

ORDERING INFORMATION

Odeon P-trap 180mm ToiletK-8711T

Includes seatK-8741T-*

Includes BowlK-8709T

Includes TankK-8710T

Odeon S-trap 255mm ToiletK-8753T

Includes seatK-8741T-*

Includes BowlK-11184T

Includes TankK-8710T

Odeon S-trap 305mm ToiletK-8766T

Includes seatK-8741T-*

Includes BowlK-8767T

Includes TankK-8710T Service parts

Fill valveK-82984-B

Mounting Plate AssyK-1004142

Flush Valve AssyK-1004139

180mm

255mm

305mm

K-8711T K-8741T-* K-8709T K-8710T K-8753T K-8741T-* K-11184T K-8710T K-8766T K-8741T-* K-8767T K-8710T

K-82984-B K-1004142 K-1004139

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 155mm (6-1/8") centers.

Passageways is 60mm (2-3/8").

Water depth from rim is 245mm (9-5/8")

Ensure that the new drain and shut-off valve have the correct roughing-in dimensions. See Fig.#1.

Be very careful while working with vitreous china products. Vitreous china can break or chip if the bolts or nuts are overtightened, or if carelessly handled.

Carefully inspect the new fixture for any sign of damage.

Fixture dimensions are nominal and conform to tolerances established by ASME Standards (A112. 19.2M).