Precision Comfort™ Owners Manual

24

TROUBLESHOOTING

In the event the Precision Comfort™ adjustable bed fails to operate, investigate the

symptoms and possible solutions provided in the chart below:

SYMPTOM

 

SOLUTION

 

 

 

 

Hand control illuminates and appears to be

 

• Verify power cord is plugged into a working,

 

grounded electrical outlet. A grounded,

operable, but will not activate bed.

 

electrical surge protection device is recommended.

 

 

Test outlet by plugging in another working appliance.

 

 

 

 

 

• Program the hand control (see Programming, for

 

 

procedures). If equipped with power down box, make

 

 

certain power down box is easily accessible. Relocate

 

 

power down box if required.

 

 

• Unplug power cord, wait 45 seconds and plug in to

No features of the adjustable bed will activate.

 

reset electronic components.

 

 

• Electrical circuit breaker may be tripped. Check

 

 

electrical service breaker box to verify.

 

 

• Defective surge protection device or electrical outlet.

 

 

Test outlet by plugging in another working appliance.

 

 

 

Hand control will not illuminate.

 

• Replace batteries in the hand control.

 

 

 

 

 

• Bed mechanism may be obstructed. Elevate bed and

 

 

check for obstruction. Remove obstruction.

Head or foot section will elevate, but will not

 

• Head section may be too close to the wall.

return to the horizontal (flat) position.

 

• Headboard may be too close the edge of the mattress.

 

 

Verify a 1.5’” (38.1mm) to 2” (50.8mm) distance

 

 

between headboard brackets and mattress. Adjust if

 

 

required.

 

 

 

 

 

• Verify headboard brackets were removed during

 

 

installation. Remove headboard brackets if still

 

 

attached to the underneath side of bed.

 

 

• If bed is located on hard surface flooring, place carpet

 

 

pieces or rubber caster cups under each leg or caster

 

 

of the bed. (see accessory sheet, included with this

 

 

product, for rubber caster cup order information).

 

 

• Elevate the head or foot section a short distance (with

Excessive massage motor noise.

 

the hand control) to realign the lift/lower mechanisms

 

with the bed support platform.

 

 

 

 

• Verify that bed is not positioned against a wall,

 

 

nightstand, or other object that may cause vibration or

 

 

noise.

 

 

• If adjustable bed is installed over a bed frame, verify

 

 

massage motors are not causing bed frame (or bed

 

 

frame components) to vibrate.

 

 

• Verify that headboard attachment hardware is

 

 

tightened firmly (if used).

 

 

 

Page 23 Page 25
Page 24
Image 24
Select Comfort Precision Comfort Adjustable Foundation owner manual Troubleshooting
Page 23 Page 25

Precision Comfort Adjustable Foundation specifications

The Select Comfort Precision Comfort Adjustable Foundation is designed to enhance your sleep experience by providing customizable support and comfort. This adjustable base seamlessly combines innovative technology with user-friendly features to help address individual comfort needs.

One of the standout characteristics of the Precision Comfort Adjustable Foundation is its ability to adjust the head and foot positions. With a simple touch of a button, users can elevate their head or legs to find the perfect sleeping or lounging position. This feature not only aids in promoting better sleep posture but can also provide relief for those with specific health conditions, such as acid reflux or sleep apnea.

The foundation is engineered with powerful, yet quiet, motors that allow for smooth transitions between positions. This means that you can adjust your bed without disturbing your partner. Additionally, users can set their preferred position and easily return to it with the one-touch memory feature, creating an effortless transition between sleeping modes.

Equipped with a responsive mattress technology, the Precision Comfort Adjustable Foundation works in harmony with Select Comfort's Sleep Number mattresses. This allows for the ultimate customizable sleep experience, as users can adjust their mattress's firmness in conjunction with the adjustable base's position. By syncing these features, couples can achieve their personal comfort preferences, even if they differ significantly from one another.

The Precision Comfort Adjustable Foundation also boasts a sleek and modern design that complements any bedroom décor. Its elegant look is enhanced by a customizable headboard bracket, making it easy to attach your preferred headboard style.

Furthermore, the foundation includes under-bed lighting, which offers convenience during nighttime hours, helping you avoid any accidents when getting up or returning to bed. Wireless remote control functionality is another key feature, allowing users to make adjustments easily, whether they're in bed or at a distance.

Overall, the Select Comfort Precision Comfort Adjustable Foundation is not merely an adjustable bed base; it is a comprehensive sleep solution designed to deliver superior comfort, support, and convenience, making it a worthwhile investment for those looking to elevate their sleep experience. With its innovative features and seamless integration with Select Comfort mattresses, this adjustable foundation promises to transform the way you experience rest and relaxation at home.
Top Page Image Contents