INSTALLATION
11.Install headboard brackets to the foundation base frame. When attaching (2) twin size units to a king size headboard, use
FAILURE TO FOLLOWNOTE HEADBOARD BRACKET INSTALLATION INSTRUCTIONS MAY CAUSE HEADBOARD BRACKET INTERFERENCE WITH BASE FOAM DURING ADJUSTABLE BED OPERATION. BASE FOAM OR BASE COVER DAMAGE COULD RESULT.
IN ORDER TO AVOID A PERSON OR PET BEING CAUGHT IN THE SPACE REFERENCED BELOW WHILE THE BED IS IN MOTION, THE BOTTOM OF THE HEADBOARD CROSS MEMBER MUST BE POSITIONED SO THAT THERE IS NO MORE THAN 3 INCHES (76.2mm) BETWEEN THE HEADBOARD AND THE TOP OF THE MATTRESS (FIGURE 7).
FAILUREDO NOTO FOLLOWEXCEED 3THISINCHESINSTRUCTION(76.2mm). COULD RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
12.Install headboard bracket assemblies per the following procedure:
a.Raise the head section of the bed (with hand control) to gain access to the bed base frame.
b.Slide one headboard bracket channel onto one side of the bed base frame. Using (2) bolts/nuts (FIGURE 8) attach channel to base frame (FIGURE 9). Hand tighten bolts/nuts (loosely) to allow adjustment of the headboard bracket channels. Repeat procedure to install the other headboard bracket channel to the other side.
AC
HEADBOARD BRACKET HARDWARE KIT CONTAINS:
(4) 3 INCH CARRIAGE BOLTS - A
(4) 1 INCH HEX HEAD BOLTS - B
B(8) NUTS - C
FIGURE 8: Headboard bracket hardware.
Precision Comfort™ Owners Manual
10
FIGURE 7: headboard cross member location must not exceed 3 inches (76.2mm) from the top of the mattress.