RECEIVER UNIT OPERATION
In case of a power outage, press and hold the learn button on the receiver unit (power down box) to lower the bed to the flat position (FIGURE 18).
This function is only for lowering the bed and will not operate the bed to any other position. The (2) 9 volt batteries should be replaced after this function is used.
In the event the power down feature does not work, check to make sure the (2) 9 volt batteries are good.
POWER
DOWN BOX
LEARN
BUTTON
FIGURE 16: Power down box learn button.
Precision Comfort™ Owners Manual
17
