2x4's
Backup Plate
Mounting
Plate
Install nut and washer.
(14.3 cm)
2"
(5.1 cm)
Bathing
Fixture
3. Install the Drip Tray Mounting Plate
Stud
Drywall or #10 Wood Screws
NOTE: The drip tray is an optional accessory available for wall mount but not for ceiling mount.
NOTE: Install the 2x4’s so the drip tray is level or has a slight forward slope to ensure proper drainage.
Attach a 2x4 flush to the back of the wall stud to support the lower lip of the drip tray mounting plate. Position the 2x4 so it will be 2″ (5.1 cm) above the top of the bathing fixture.
Attach a second 2x4 so it is
NOTE: When 2x6 wall studs are present, install the 2x4’s so they are supported 2″ (5.1 cm) from the back of the wall stud.
Attach the drip tray mounting plate to the 2x4’s using six drywall or #10x1″ screws. Make sure the mounting plate is centered under the spout’s location.
6 | Kohler Co. |