User Instructions
Read the section “Important Safety Information” first.
1.2.
Switch on electrical supply. | Press the ‘Start/Stop’ button. |
3. | 4. |
Set to desired position. | Check water temperature before |
5. | entering shower. |
|
Allow 10 - 15 seconds for any temperature adjustments to reach the handset.
6.7.
Residual water may drain over a few minutes.
Press STOP button. Shower will continue to run for a few seconds before stopping.
Note! At the end of every shower make sure that the shower head points into the catchment area. A small amount of water may be retained in the shower handset after the shower has been turned off. This may drain over a few minutes.
19
