Inlet Filter - Cleaning/Renewing
Read the section “Important Safety Information” first
Make sure that the electrical supply is turned off at the mains and that the water supply is fully turned off.
Remove the three screws and the cover.
Caution! Handle glass cover assembly with care.
Cover Retaining Screw
Hold a wrench across the flats of the metal connector. Unscrew the filter using another wrench as shown. Clean or renew the Filter as necessary. Refit in reverse order making sure the Filter is screwed fully home.
Do not overtighten. Make sure plumbing connections are sealed before restoring electricity supply.
Refit the Cover making sure it is correctly located. Do not overtighten the screws.
Cover
Filter
24
