Items supplied
Cyclone Vacuum cleaner
Suction hose
Telescopic tube
Floor tool
Accessory holder
Crevice tool
Upholstery brush
Operating instructions
Order card
Technical data
Power supply: | |
Power rating: | min: 1400 W |
| max: 1800 W |
Protection class: | II |
Appliance description
1Dust collector carrying grip
2 Unlock button for housing lid
3 Exhaust filter cover
4 Storage bracket for floor tool
5 On/Off switch
6 Vacuum cleaner carrying grip
7 Suction power regulator
8 Foot button for power cable rewind
9 Power cable with power plug
0 Storage bracket for floor tool q Housing cover
w Selector switch for carpet/hard surface e Floor tool
r Storage hook t Dust collector
z Suction pipe connector
u Height adjuster for telescope tube i Storage hook
oTelescope tube p Accessory bracket a Suction hose
s Secondary air regulator d Hand grip
f Crevice tool
g Upholstery brush (rotatable through 360°)
Unpacking and assembly
Unpacking
•Unpack the appliance and the accessories and check that all listed items are available.
Assembly
Attention!
Assemble the appliance with the plug 9 disconnec- ted from the power supply. The appliance could be inadvertantly switched on.
1.Insert the suction pipe connector z into the socket on the vacuum cleaner until the locking device engages.
2.Insert the hand grip d into the upper end of the telescope tube o until it is firmly seated.
3.Place the desired tool (floor tool e, crevice tool f or upholstery brush g, see chapter „Changing tools“) on the lower end of the telescope tube o.
4.Adjust the telescope tube o to the desired length: Press the height adjustor u down. Pull the telescope tube o apart on the hand grip d. When you have the desired length release the height adjuster u. Pull the telesopic tube o a little further until it audibly engages.
The Cyclone Vacuum Cleaner is now ready for use.
- 3 -
