Notice
Place at least 2 measuring beakers of rice into the rice cooker! A lesser volume of rice could cause inferior cooking results!
6.Then add water in the cooking bowl 4 as per the following cup markings:
•2 Measuring beakers of rice = Water up to cup marking “2”
•4 Measuring beakers of rice = Water up to cup marking “4”
•6 Measuring beakers of rice = Water up to cup marking “6”
•8 Measuring beakers of rice = Water up to cup marking “8”
•10 Measuring beakers of rice = Water up to cup marking “10”
Subject to taste preferences, salt can also be added to the rice.
Notice
Subject to the type/sort of rice being prepared, it could be that you may have to insert a little more or less water to achieve an optimal cooking result. Vary the amount of water in accordance with your individual experiences and personal preference.
7.When the cooking bowl 4 is full, place it back in the rice cooker housing. To avoid dirtying the cooking area, ensure that there is no moisture or rice located on the outside of the cooking bowl 4. If necessary, wipe the outside with
a clean cloth.
Notice
This appliance is fitted with a safety switch: the cooking process cannot be started with an empty cooking bowl 4.
8.Close the appliance lid 2.
9.Insert the power cable into the socket 8 on the side of the appliance.
10.Insert the power plug into a properly installed power socket. The yellow control lamp 
5 glows.
IMPORTANT:
During the cooking process steam is emitted from the steam exit opening 1. NEVER hold your hands or other parts of the body over the steam exit ope- ning 1 during the cooking process. There is a risk of receiving severe scalds!
11.Press the function selector switch 7 down. The yellow control lamp 
5 extinguishes and the red control lamp 
6 starts to glow. The cooking process begins.
Notice
If the cooking bowl 4 is not correctly positioned, the function selector switch 7 cannot be moved to the setting “Cooking”.
As soon as the rice is cooked, the rice cooker switches itself automatically back to the 
6 extinguishes and the yellow control lamp 
5 starts to glow.
Allow the rice to stand for at least 15 minutes in the cooking bowl 4 - with the lid on 2 on.
12.Remove the lid 2 and stir the rice with the supp- lied plastic spoon to loosen it up. The rice is now ready to eat.
Important
Use only the supplied plastic spoon for stirring or serving the rice. Other spoons may cause damage to the
If the rice should be kept warm for a longer period, wait until shortly before eating before stirring the rice. Do not remove the lid 2 while the rice is being kept warm and do not leave the rice in the appliance for longer than 2 hours.
- 4 -
