
Usage | Radio functions |
Switching the appliance on/off and sound source selection
The appliance is switched on by you selecting a sound source with the function switch:
•CD
•Radio
1.Slide the function switch to the position of your desired sound source.
2.To switch the appliance off, slide the function switch to the position "OFF".
Adjusting the volume.
You can adjust the sound volume with the volume re- gulator.
•To increase the sound volume turn the volume re- gulator clockwise.
•To reduce the sound volume turn the volume re- gulator
Using headphones
You can connect headphones to the
•Insert the headphone jackplug into the headpho- ne connection.
Attention!
Before putting on a set of headphones turn the volume level down to the mini- mum! Your hearing could be damaged if it is subjected to high volume levels for too long or suddenly!
1.Raise the telescopic antenna and extend it to full length. Adjust the antenna positioning so that ra- dio reception is optimal.
For receiving MW (AM) transmissions, there is an inbuilt reception antenna. In radio operation, turn the whole appliance to a position where the best ra- dio reception is obtained.
2.Adjust the receptionrange (AM/FM/FM ST.) with the waveband selector. With the adjustment
FM ST radio programmes transmitted in stereo will be played back in stereo. Should the program- me be received in stereo at full strength the FM stereo display lights up.
Notice:
Should the stereo signal in the reception range FM ST be too weak, you can improve it in that you select the adjustment FM. In this adjustment the sound is played in Mono.
3.Through turning the tuning regulator, the desired radio station can be selected.
- 5 -