Scanner setup

Before connecting the scanner

Before connecting the scanner to a computer, the DiMAGE Scan Utility must first be installed. See pages 9 through 14 for the installation procedure.

The scanner should be placed on a level surface free from vibrations. It should be located away from direct sunlight and in a clean, dry, well-ventilated area. Never connect the scanner cable while data is being transferred between the computer and peripheral devices.

Names of parts

Indicator lamp

Power switch

Front door

 

Quick Scan button

USB port

Eject button

 

Focus dial

DC terminal

 

Connecting the scanner

Securely plug the A connector of the USB cable into the scanner’s USB port (1) and the B connector into the computer’s USB port. The scanner should be connected directly to the computer. Attaching the scanner to a USB hub may prevent proper operation.

2

1

Connect the output plug of the AC adapter to the scanner’s DC terminal (2). Plug the AC adapter into a standard household outlet.

16Scanner setup

Turning on the scanner

Turn on the scanner with the power switch. Start up the computer.

Scanner Notes

When launching the DiMAGE Scan Utility, the indicator lamp blinks when the scanner is initializing. Once the indicator lamp glows steadily, the scanner can be used.

When the scanner is initially connected to a computer with a Windows XP operating system, the found-new-hardware wizard appears. Use the automatic installation option. Click the next button.

The “not passed Windows Logo testing” message appears. Click the continue-anyway button to complete the scanner installation.

When the scanner is initially connected to a computer with a Windows 98, 98SE, or 2000 Professional operating system, the found-new-hardware wizard appears briefly. No action is required. With Windows 2000, the “Digital Signature Not Found…” message may appear. Click the yes button to complete the scanner installation.

Disconnecting the scanner

Never disconnect the scanner when the indicator lamp is blinking.

Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the scanner off and then disconnect the cable.

Indicator lamp

17