Konica Minolta 5440 DL manual Controller, Processor, Memory

Controller

The magicolor 5440 DL uses the power of the Windows, Mac, or

Linux operating system to deliver great performance for less cost.

Type

The magicolor 5440 DL uses an easy-to-access controller with 64 MB

SDRAM on board.

Processor

The magicolor 5440 DL supports the Graphical Display Interface (GDI) for Windows, host-based PostScript® rasterizer for Macintosh, and PageScope Raster Language for Linux. As such, the printer utilizes the power of the host computer’s CPU for processing documents prior to printing. The printer’s controller features an ARM9, 200 MHz processor for imaging the document.

Memory

The magicolor 5440 DL includes 64 MB of RAM on the controller. This memory is sufficient for printing all supported page sizes (simplex and duplex) at all resolutions. The printer also has one available DIMM (Dual In-Line Memory) socket for increasing system RAM.

†Standard RAM: 64 MB on board

†Maximum RAM: 576 MB

The magicolor 5440 DL has one open DIMM slot that accepts up to 512 MB RAM available exclusively from KONICA MINOLTA. Memory is available in 128 MB, 256 MB, or 512 MB increments. This additional memory can improve the printer’s performance, especially when used in a network environment with the optional duplexer or camera-direct photo printing feature installed.

10