
FOCUS-AREA  SWITCH
The 
Wide focus area - to use the wide focus frames in the viewfinder to focus. See the basic operation section on page 28. Pressing and holding the 
Spot AF
Spot AF can be used when using the wide focus area. With the spot AF area placed on the subject, press and hold the central button of the controller to focus. The viewfinder focus signal confirms focus and the spot AF indicator (1) is displayed on the monitor.
Compose the image in the viewfinder and press the 
Spot AF area 
Focus signal 
54Advanced recording
Focus-area  selection
Slide the 
Use the controller to select the AF area; the camera focuses each time an area is selected. The eight way keys select the local areas and the central button selects the spot AF area.
The active area is indicated on the monitor and is briefly illuminated in the viewfinder.
When the appropriate controller key pressed and held, focus is locked; the viewfinder focus signal confirms focus. Compose the image in the viewfinder and press the 
Sliding the 
Camera Notes
Only the spot AF area can be used with the AF Reflex 500mm f/8 and AF Power Zoom 35- 80mm 
55