FOLDER NAME
All recorded images are stored in folders on the memory card. Folder names come in two formats: standard and date.
Standard folders have an eight character name. The initial folder is named 100KM023. The first three digits are the folder’s serial number, which increases by one each time a new folder is created. The next two letters refer to Konica Minolta, and the last three numbers indicate the camera used; 023 indicates a Dynax 7D.
A date folder name also starts with the three digit serial number and is followed by one register for the year, two register for the month, and two registers for the day: 100YMMDD. The folder 10141023 was created in 2004 on October 23rd.
With the date folder format selected, when an image is recorded a new folder with the day’s date is created. All images recorded that day are placed in that folder. Images recorded on a different day are placed in a new folder with the corresponding date. When a new folder is created, the serial number in the
NEW FOLDER
This allows the creation of new folders. The
Highlight “Enter” and press the center of the controller to create a new folder.
The new folder name is displayed briefly. Every time a new folder is created, the folder number increases automatically by one greater than the highest folder number on the memory card.
LCD BACKLIGHT
File # memory
Folder name
Select folder
|
| New folder | Enter |
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
101KM023 folder created.
SELECT FOLDER
This option specifies in which folder images are saved. Only folders with a standard folder name can be selected. If the date folder name option is used, images are placed in a folder with the corresponding date of recording. Select folder is in section 2 of the setup menu (p. 102).
File # memory | Off |
Folder name | Std. form |
|
|
Select folder | 100KM023 |
|
|
New folder | – |
The LCD monitor backlight turns off to conserve power after a certain period. Press a camera button to restore the display. This period can be set to 5, 10, 30, or 60 seconds in section 3 of the setup menu (p, 102).
LCD backlight | 5 sec. |
Power save | 3 min. |
MenuSec.Memory | Off |
Delete conf. | “No” |
Clean CCD | – |
Reset default | – |
AUTO POWER SAVE
The camera shuts down to conserve battery power if no operation is made within a certain period. The length of this period can be changed to 1, 3, 5, 10, or 30 minutes. To restore power, press the
108 Setup menu | 109 |