LCD BRIGHTNESS
Monitor brightness is adjusted in section 1 of the setup menu. Highlight “Enter” and press the central button of the controller to open the LCD brightness setup screen.
Brightness is controlled in eleven levels. Use the left/right controller keys to adjust the brightness, the monitor adjusts accordingly.
Press the central button of the controller to set the level and complete the operation. Press the menu button to close the screen without applying any changes.
LCDbrightness Enter
Transfer mode
Video output
Audio signals
Language
Date/Time set
Set LCD brightness
Low |
| High |
| ||
|
:adjust 
:enter
VIDEO OUTPUT
Camera images can be displayed on a television. The video output can be changed between NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check which standard is used in your region to play back images on your television set.
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a
1. Turn off the television and the camera.
2. Slide the terminal cover open (1) and insert the plug of the video cable into the camera’s
3. Plug the other end of the video cable into the video input terminal on the television.
TRANSFER MODE
The
Data storage - to transfer data between the camera and a computer. This option must be selected when moving image files to a computer or when using the DiMAGE Viewer or DiMAGE Master software.
PTP - to print images with a PictBridge compatible printer. See page 132 for more on PictBridge.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn on the camera and press playback button. The camera’s monitors do not activate when the camera is attached to a television. The
7.View images as described in the playback section. Because of the broadcast standard used to display television images, image quality and resolution will appear lower than when displayed on a computer monitor.
104 Setup menu | 105 |