CUSTOM FUNCTIONS

Cust 4 — DX Memory

1 – DX Memory Off

Film speed is always set to the DX-coded ISO. Non-DX-coded film is set to the previous roll’s ISO.

2 – DX Memory On

Changes to the film speed for a DX coded roll are saved and applied to future rolls with the same DX coded ISO. Use to consistently over/under-expose a specific film type.

• Film must be loaded before the ISO can be changed.

Cust 5 — Release Lock (Film)

1 – Release Lock Off

2 – Release Lock On

Shutter cannot be released unless film is loaded or the back cover is open.

• blinks in the frame counter if the shutter-release button is pressed when film is not loaded.

Cust 6 — Focus Hold Button (Lens)

The mounted lens must have a focus hold button.

1 – Focus Hold

Pressing the focus-hold button on the lens locks the focus.

2 – Spot Focus

Pressing the focus-hold button on the lens selects the center focus sensor (p.31).

3 – Continuous Focus

Select this setting when focusing on moving subjects.

Pressing the focus-hold button on the lens selects continuous focus.

Cust 7 — Eyepiece Sensor

1 – Grip sensor activated

Eyepiece sensor is activated when the grip sensor is tripped.

2 – Main switch activated

Eyepiece sensor is activated when the main switch is in the ON position. Use this setting when the grip sensor is not being tripped (user wearing gloves).

• Slide the main switch to LOCK when the camera is not being used.

SPECIAL FUNCTIONS

94

95