OTHER — Remote Release Terminal

Attach either the Remote Cord RC-1000S or RC-1000L (sold separately) to reduce blur when taking long exposures.

1.Slide the remote-control-terminal cover down.

2. Insert the plug into the terminal.

OTHER — PC Terminal

Flash units which can not be connected to the accessory shoe can be connected to the camera via the PC terminal.

•TTL automatic flash metering does not function when the flash is connected to the PC terminal.

1.Set the exposure mode dial to M, then set the shutter speed to 1/250 or slower.

2. Plug the PC connector into the camera’s PC socket.

• The flash unit may fire unexpectedly if it is on when the sync. cord is plugged into the PC terminal.

• The PC terminal is compatible with both center positive (normal polarity) and center negative (positive polarity) flash units.

Flash units with a low trigger voltage may not work on this camera. Contact a Minolta Service Facility if your flash has a low trigger voltage.

ADDITIONAL FEATURES

80

81