TROUBLE SHOOTING
| PROBLEM | CAUSE | |
|
| |
No display appears | Batteries are loaded incorrectly. | |
when the camera is |
| |
| ||
switched on. | Batteries are exhausted. | |
|
| |
Autofocus does not work | Situation is unsuitable for autofocus. | |
| ||
when | Camera is set to manual focus mode. | |
button is pressed | ||
| ||
partway down. |
| |
Subject is too close. | ||
| ||
|
| |
| Focus cannot be confirmed. | |
Shutter cannot be |
| |
Camera is attached to a microscope or telescope. | ||
released. | ||
| ||
|
| |
| Custom Function 5 set to setting 2. | |
|
| |
Flash picture is too dark. | Subject is beyond flash range. | |
|
| |
Lower part of flash | Lens hood attached. | |
picture is dark. | ||
| ||
|
| |
Err appears in the data | Camera Malfunction | |
panel. | ||
| ||
|
|
| SOLUTION | PAGE |
|
|
Remove and reinstall the batteries. | 10 |
|
|
If the camera battery is exhausted, install a new battery. | 10 |
|
|
Use focus hold or manual focus. | 21/33 |
|
|
Slide the | 18 |
|
|
Check the minimum focus distance for your lens. | - |
|
|
Use focus hold or manual focus. | 21/33 |
|
|
Set Custom Function 16 to setting 2. | 99 |
|
|
Set Custom Function 5 to setting 1. | 94 |
|
|
Make sure the subject is within the flash range. | 23 |
|
|
Remove lens hood. |
|
The distance between the subject and the camera must be at least | - |
1m (3.3ft.) when the |
|
|
|
Remove and reinstall the batteries. If normal camera operation does |
|
not resume or the camera malfunctions repeatedly, contact an | 10 |
authorized Minolta Service Facility. |
|
|
|
•Contact your nearest Minolta Service Facility if the problem you are experiencing is not covered or the condition continues.
APPENDIX
108 | 109 |