DATA MEMORY
When selected, Data Memory stores the following exposure information for each frame on up to seven
Shutter Speed
Aperture
Focal Length
Exposure Compensation Value (Bracketing Increment included)
Exposure Mode
Flash Compensation Value (Bracketing Increment included)
Metering Mode
Data is stored in seven separate film areas. Area 1 stores the data from the first roll, area 2 the second, etc. When all the data areas are full, new data is written to area 1, erasing the previous data.
•Data area assignments are not user selectable.
•Only the data for the first exposure of a multiple exposure is stored.
•Data is not stored unless film is loaded.
Selecting Data Memory
1. Open the control panel door, then press the data-memory button.
2. Turn either control dial until appears in the data panel.
• The film area to which the data will be stored is displayed in the frame counter.
3. Press the
• appears in the data panel when data- memory is on.
| FUNCTIONS |
display the current film area. | SPECIAL |
Press the |
|
Select at step 2 to turn data-memory off.
84 | 85 |