DATA MEMORY

4. Turn the front control dial to select the desired frame number.

– The shutter speed and aperture for the selected frame are displayed in the data panel.

Shutter Speed DisplayAperture Display

5. Turn the rear control dial one click to display the focal length and exposure compensation / bracketing increment for the selected frame.

• The exposure compensation and bracketing increment are combined into a single value.

Focal Length DisplayExposure Compensation /Bracketing Increment Display

6.Press the AE-lock button at step 4 or 5 to display the metering mode, flash compensation / flash bracketing increment and exposure mode.

•The flash compensation and bracketing increment are combined into a single value.

Metering Mode Display

– 14-Segment Honeycomb Pattern (p.45)

– Center Weighted Average (p.47)

– Spot (p. 46)

Flash Compensation /

Bracketing Increment Display

– Flash fired without compensation.

– Flash didn’t fire.

7.Press the adjust button again toreturn to data memory.8.Turn either control dial to select data

memoryor, then press the shutter-release button partway down

to enter the selection.

•Press the shutter-release button partway down twice to return to standard operation mode with data memory on.

SPECIAL FUNCTIONS

88

89