SETTING UP THE CAMERA
1 
Controller
JAPANESE
ENGLISH
FRANCAIS
DEUTSCH
Would you like to select
ENGLISH ?
YESNO
When the camera is initially turned on, the LCD monitor will activate and prompt you to set the menu language and the date and
time. Turn the camera on by setting the mode dial to the setup position. The
controller is used to make settings on the LCD monitor.
Use the up/down key of the controller to highlight the desired language.
To select the language, press the center of the controller. A confirmation screen will appear.
On the confirmation screen, use the left/right key to select “YES.”
•Choosing “NO” will cancel the operation and return to the language selection screen.
Press the center of the controller to execute the command.
After the language is set, the date/time screen will appear automatically. Please take time to accurately set the clock and calendar; when an image is taken, the date and time of capture is recorded with it.
Date/Time set
Year 2001
Month 1
Day 1
00:00
Use the up/down key to highlight in red the setting to be changed.
•When the hour is highlighted, pressing the down key will highlight the minutes.
Use the left/right key to change the highlighted setting.
When the date and time have been set, press the center of the controller.
•A confirmation screen will appear. Use the left/right key to select “YES”; choosing “NO” will cancel the operation and return to the date/time screen. Press the center of the controller to to execute the command on the confirmation screen. If an error was made setting the language or date, they can be reset on the setup menu (p. 38).
13