PC MODE

CONNECTING TO WINDOWS 98 AND 98SE

The driver needs only to be installed once. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen. To install the Windows 98 driver, follow the instructions in the connecting-the-camera-to-a- computer section on page 43.

When the camera is plugged into the computer, the operating system will detect the new device and the add-new-hardware-wizard window will open. Place the DiMAGE E203 CD-ROM in the CD-ROM drive. Click “Next.”

Choose to search for the driver in the CD- ROM drive. Click “Next.”

Choose the recommended search for a suitable driver. Click “Next.”

The add new hardware wizard will confirm the location of the driver. Click “Next” to install the driver in the system.

•The letter designating the CD-ROM drive will vary between computers.

The last window will confirm the driver has been installed. Click “Finish” to close the add new hardware wizard.

44