PC MODE
CHANGING THE MEMORY CARD (PC MODE)
Care should be taken when changing memory cards while the camera is attached to the computer. Data could be lost or damaged if the camera is not properly disconnected.
Always confirm the access lamp is out before removing the memory card.
MACINTOSH
1.Stop the USB connection by dragging the drive icon into the trash (p. 46).
2.Turn off the camera.
3.Change the memory card.
4.Turn the mode dial to the playback or recording position to remake the USB connec- tion.
WINDOWS 98 AND 98SE
1.Turn off the camera.
2.Change the memory card.
3.Turn the mode dial to the playback or recording position to remake the USB connec- tion.
WINDOWS ME AND 2000 PROFESSIONAL
1.Stop the USB connection using the
2.Turn off the camera.
3.Change the memory card.
4.Turn the mode dial to the playback or recording position to remake the USB connec- tion.
Minolta History
On February 20th, 1962, John Glenn became the first American to orbit the Earth. On board his Friendship 7 spacecraft was a Minolta
Mr. Glenn visited our Sakai camera factory in Japan on May 24th, 1963 to plant a palm tree to celebrate the occasion. The palm tree is still in the courtyard of the factory and stands over eight meters tall (26ft).
The camera? It was not lost. It is on display at the Smithsonian Institution’s National Air and Space Museum in
Washington D.C. This and other objects from John Glenn’s Friendship 7 Mercury flight can be found in gallery 210, “Apollo to the Moon.”
48