Problem | Cause | Solution |
|
|
|
|
| Move closer to the subject or set |
While using flash, the pictures | The subject is beyond the | the camera to the flash cancel or |
are too dark. | flash range (p. 19). | landscape mode |
|
| (p. 18). |
|
|
|
When photographing outside at |
| Use a special lens cloth or tissue |
night, flare is apparent around | The lens is not clean. | to gently wipe the lens surface (p. |
bright light sources . |
| 52). |
|
|
|
If the camera does not function normally, turn it off, remove and reinsert the batteries, or unplug and reconnect the AC adapter. Always turn the camera off using the mode dial otherwise the memory card may be damaged and camera settings reset.
Focus lamp (green)
Flash lamp (red)
The LEDs next to the viewfinder can indicate the status of the camera. The LED warnings can be accompanied by an audio signal.
LED
LED Audio
status signal
| Blinking | No | AF warning. A special situation is preventing the camera from |
| focusing (p. 15) or the subject is outside autofocus range: 0.8m | ||
|
|
| – ∍. |
|
|
|
|
| Steady | No | Focus is locked (p. 15). The image can be taken. |
|
|
|
|
| Blinking | Yes | System error. “Err” appears on the data panel. Reset the cam- |
| era by turning it off and on. | ||
|
|
| |
|
|
|
|
| Blinking | No | |
|
|
|
|
| Steady | No | Flash is charging. |
|
|
|
|
| Blinking | Yes | Memory card is full, damaged, unformatted, or write protected |
| (p. 7). No memory card in camera. | ||
|
|
| |
|
|
|
|
| Blinking | No | AF warning and |
|
|
|
|
| Steady | No | Data is being transferred between the camera and memory |
| card. | ||
|
|
| |
|
|
|
|
51