INSERTING BATTERIES
This camera requires 4 AA size batteries. Either Alkaline or Nicad batteries can be used.
•Nicad batteries must be fully charged in the appropriate charger, as indicated in the battery instruction manual.
•Do not mix battery types.
Open the card/battery chamber cover as shown.
Insert the batteries as indicated in the +/– diagram on the camera.
• Insert (1) and (2) first, making sure the contacts are touching. Then firmly push the batteries into the cabinet.
Close the card/battery chamber cover and slide it shut, as shown, until it clicks.
BATTERY-CONDITION INDICATOR
When the battery power is low, 
will blink in the LCD monitor. Replace all 4 batteries or use AC Adapter
• The battery power will run out completely without further warning.
AUTO POWER OFF
•To save power, the camera shuts off automatically if it is not used for 2 minutes (Auto Power Off). To restart the camera, press the main switch to turn the camera on. Auto Power Off does not function when the camera is connected to the computer with the serial cable.
•Auto Power Off functions when the camera is connected to the AC Adapter
The AUTO OFF warning will blink in the LCD monitor 10 seconds before the Auto Power Off function activates.
20 | 21 |