SELECTING IMAGE QUALITY

Storing uncompressed still-image files normally requires a large amount of disk space. This usually results in small recording capacity on the image memory cards. The Dimâge V uses JPEG compression (an international standard) to compress the image data before it is recorded on the image memory card.

Compression Mode

Capacity

(2MB SmartMedia™)

 

Fine Mode

16 images (aprox.)

(Priority - image quality)

 

Standard Mode

40 images (aprox.)

(Priority - storage capability)

 

*Stated capacity is an estimate assuming all images are all captured in either FINE or STD mode.

Set the image quality selector to FINE or STD.

.The image quality in Standard (STD) is lower than that in Fine.

.It is possible to switch between Fine and Standard modes at anytime. There is no problem mixing quality modes on the same image memory card. The number of images stored on a card will vary depending on the quality modes selected. Use the display button to check the estimated number of frames remaining (see page 36).

BASIC RECORDING

Press the main switch to turn the camera on.

Slide the record/play switch to REC.

Press the flash mode button to select Auto Flash mode ( ).

•The flash will automatically fire in low-light and backlit situations.

The flash has a limited range. Make sure your subject is within the distances stated below.

Focal Length

Flash Range

 

 

WIDE (4.8mm)

0.3 - 2.5m (1.0 - 8.2 ft.) aprox.

 

 

TELE (13mm)

1.0 - 2.2m (3.3 - 7.2 ft.) aprox.

 

 

Continued on next page.

30

31