DELETING A SINGLE IMAGE

Below is the procedure to delete a single, unprotected image from the SmartMedia™ in the camera

(see page 62 for information on protecting images).

•To delete the image that was just taken, start at .

•To delete an image while viewing in play mode, start at .

Press the main switch to turn the camera on.

Slide the record/play switch to PLAY.

• The last-recorded image will appear in the LCD monitor.

Use the + or – button to scroll through the images.

• The + button goes to the next frame. The – button goes to the previous frame.

•Press and hold the button to continually scroll.

•Use the index display to quickly find an image (pages 51-53).

Press and hold the delete button for more than one second.

• If the delete button is released before the one second count, the image will not be deleted.

• While the image is being deleted,

the delete mark ( ) appears on the monitor - as shown at left.

While the delete mark appears on the screen:

- Do not unplug the AC Adapter. - Do not open the card/battery

chamber cover.

To delete additional images, repeat steps and .

Protected images cannot accidentally be "Deleted". See page 62.

58

59