
Basic recording operation
The example uses auto recording. Except for movie recording, the operation for other exposure modes is the same. Automatic Digital Subject Program Selection is only available in the auto recording mode.
Place the subject anywhere within the focus frame. Make sure the subject is within the focus range of the lens (p. 24). For very close subjects, use the macro function (p. 35).
Press the
|
|
|
|
|
|
|
| The focus signal (b) on the monitor will confirm focus lock. If the |
|
|
|
|
|
|
|
| focus signal is red, the camera was unable to locate the subject. |
|
|
|
|
|
|
|
| Repeat the previous steps until the signal is white. The shutter |
| a |
|
|
| b |
| speed (c) and aperture (d) appears and turns black to indicate the | |
|
|
|
|
|
|
|
| exposure is locked. |
c | d |
|
|
| ||||
|
|
Press the
The access lamp lights indicating image data is being written to the memory card or the internal memory. Never remove or insert a memory card while data is being saved.
Camera notes
The recorded image can be previewed by continuing to hold down the
Automatic Digital Subject Program Selection
Automatic Digital Program Selection chooses between program autoexposure and one of five digital subject programs. The digital subject programs optimize camera setting for various conditions and subjects. Automatic Digital Subject Program Selection is only available in auto recording and can be disabled in the
A row of gray indicators at the top on the monitor display will indicate Automatic Digital Subject Selection is active. Place the subject in the focus frames; the procedure is the same as the basic recording operation described on page 22.
Press the
Program autoexposure (the Digital Subject Program indicators disappear)
Portrait | Landscape |
Sports action | Sunset |
22 | BASIC RECORDING | 23 |