Changing the memory card

Never remove or insert a card when the access lamp is red - the data or memory card may permanently be damaged.

Windows®98 and 98 Second Edition

1.Turn off the camera.

2.Remove, insert, or replace the memory card.

3.Turn on the camera to remake the USB connection.

Windows®Me, 2000 Professional, and XP

1.Stop the USB connection using the unplug-or-eject-hardware routine (p. 104).

2.Turn off the camera.

3.Remove, insert, or replace the memory card.

4.Turn on the camera to remake the USB connection.

Mac OS

1.Stop the USB connection by dragging the drive icon into the trash (p. 105).

2.Turn off the camera.

3.Remove, insert, or replace the memory card.

4.Turn on the camera to remake the USB connection.

Uninstalling the driver software - Windows

1.Connect the camera to the computer with the USB cable. Other devices must not be connected to the computer during this procedure.

2.Right click on the My-computer icon. Select “properties” from the drop-down menu.

Windows®XP: from the start menu go to the control panel. Click on the performance and mainte- nance category. Click “System” to open the system properties window.

3.Windows®2000 and XP: select the hardware tab in the properties window and click the device- manager button.

Windows®98 and Me: click the device-manager tab in the properties window.

4.The driver file will be located in the universal-serial-bus-controller or other-devices location of the device manager. Click on the locations to display the files. The driver should be indicated with the camera name. Under certain conditions, the driver name may not contain the camera name.

However, the driver will be indicated by either a question mark or exclamation point.

5.Click on the driver to select it.

6.Windows®2000 and XP: click on the action button to display the drop-down menu. Select “unin- stall.” A confirmation screen will appear. Clicking “Yes” will remove the driver from the system. Windows®98 and Me: click the remove button. A confirmation screen will appear. Clicking “Yes” will remove the driver from the system.

7.Disconnect the USB cable and turn off the camera. Restart the computer.

106 DATA-TRANSFER MODE

107