Care and storage

Read this section in its entirety to get the best results from your camera. With proper care, your camera will provide years of service.

Camera care

Do not subject the camera to shock or impact.

Turn off the camera when transporting.

This camera is neither waterproof nor splashproof. Inserting or removing batteries or the memory card, or operating the camera with wet hands may damage the camera.

When at the beach or near water, take care not to expose the camera to water or sand. Water, sand, dust, or salt can damage the camera.

Do not leave the camera under direct sunlight. Do not point the lens directly at the sun; the CCD may be damaged.

Storage

Store in a cool, dry, well-ventilated area away from dust and chemicals. For long periods of disuse, store the camera in an airtight container with a silica-gel drying agent.

Remove the batteries and memory card from the camera when not in use for extended periods.

Do not store the camera in an area with naphthalene or mothballs.

During long periods of storage, operate the camera occasionally. When taking the camera out of storage, check that the camera is functioning properly before using.

Cleaning

If the camera or the outside of the lens or flash surface is dirty, gently wipe it with a soft, clean, dry cloth. If the camera or lens comes in contact with sand, gently blow away loose particles. Wiping may scratch the surface.

To clean the lens surface, first blow away any dust or sand, then gently wipe the lens with a cloth or tissue designed for optics. Use lens-cleaning fluid if necessary.

Never use organic solvents to clean the camera.

Never touch the lens or flash surface with your fingers.

LCD monitor care

The LCD monitor is manufactured using high-precision technology and more than 99.99% of the pixels operate properly. Less than 0.01% of the monitor pixels are displayed as color or bright points; this is not monitor defect and does not affect the recorded image.

Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.

In cold temperatures, the LCD monitor may become temporarily dark. When the camera warms up, the display will function normally.

If fingerprints are on the LCD monitor, gently wipe with a soft, clean, dry cloth.

Batteries

Battery performance decreases with temperature. In cold environments, we recommend keeping spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power when they warm up.

If batteries have been exhausted when used in the camera, do not reload them even if their charge seems to recover over time. These batteries will interfere with normal camera operation.

A special built-in long-life battery supplies power to the clock and memory when the camera is off. If the camera resets each time it is turned off, the battery is exhausted. The battery must be replaced at a Konica Minolta service facility.

Operating temperatures and conditions

This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).

Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to extreme humidity.

When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to prevent condensation from forming. Allow the camera to come to room temperature before removing it from the bag.

116 APPENDIX

117