Viewing images on a television
It is possible to view camera images on your television. The camera has a
1. Turn off the television and the camera.
2.Insert the small plug of the video cable into the camera’s
3.Plug the other end of the video cable into the video input
terminal on the television.
| 4. Turn the television on. |
2 | 5. Change the television to the video channel. |
SETUP MENU
The setup menu is used to control the camera’s functions and operation. The navigating the setup menu section covers the operation of the menu. The section is followed by detailed descriptions of the settings.
Opening the setup menu
The setup menu is opened from the other menus. It can be accessed from any of the recording or playback menus.
Drive m |
|
| Use the right key of the controller to highlight setup | |
Image |
|
| ||
Drive mode | Single | tab at the top of the menu. | ||
Quality | ||||
Image size | 2560x1920 |
| ||
Auto D |
| |||
Quality | Standard |
| ||
Digital |
| |||
Auto DSP | On |
| ||
|
| |||
| Digital zoom | Off |
|
6. Turn the camera’s mode dial to the playback position and |
turn on the camera. The camera’s monitors will not activate when the camera is attached to a television. The playback- mode display will be visible on the television screen.
7. View images as described in the playback section.
|
|
LCDbrightness | – |
Power save | 1 min. |
Inst.Playback | Off |
Lens acc. | None |
Language | English |
|
|
|
|
Setup menu
Press the central button of the controller to open the setup menu.
Reverse the procedure to return to the original menu. Pressing the menu button closes the menu and returns to the recording or playback modes.
84 | ADVANCED PLAYBACK | 85 |