GETTING UP AND RUNNING

INSTALLING BATTERIES

This digital camera uses two AA-size alkaline or Ni-MH batteries or one CR-V3 lithium battery. Do

not use other types of AA-size batteries. When using Ni-MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment. Before using the batteries, read the safety warnings on page 3 of this manual.

When replacing the batteries, the camera should be turned off.

2

1

Open the battery-chamber door on the bottom of the camera by sliding the door toward the side of the camera (1) to release the safety catch; the door can then be opened (2).

Insert the batteries as shown (3). Never force the batteries.

Close the battery-chamber door (4) and slide it toward the body (5) to engage the safety catch.

3

+-

4

 

Camera Notes

 

The camera will reset if the batteries are removed for an

 

extended period. An internal battery protects the clock,

5

calendar, and camera settings for about 7 days if the

camera is used for at least two days before the batter-

ies are removed.

12GETTING UP AND RUNNING