SINGLE-FRAME ADVANCE RECORDING MODE

See page 22 to set the single-frame advance mode.

Place the subject within the LCD monitor or viewfinder. The focus range is 50cm (1.6ft) to infinity. Both the LCD monitor and viewfinder can be used to frame the subject. However, because of paral- lax, only the monitor’s live image will be accurate with subjects closer than 1m (3ft.) at the zoom lens’ wide-angle position or 3m (10ft) at the telephoto position. The focus-lock function can be used (p. 28).

1

2

Press the shutter-release button partway down (1) to lock the focus

and exposure.

 

• The focus signal and focus frame will

 

 

 

100

appear on the monitor to show the

 

 

 

image is in focus. If they do not appear,

 

 

the camera was unable to focus on the

 

 

subject. Repeat the previous steps until

 

 

they appear on the monitor. The shutter

 

 

can be released regardless of whether

 

 

the camera can focus on the subject or not.

 

Press the shutter-release button all the way down (2) to take the pic- ture.

• After the shutter releases, the indicator

lamp next to the viewfinder will turn orange indicating image data is being written to the memory card. Never remove a memory

card while data is being transferred.

The image can be previewed after it is captured by pressing the central button of the controller.

26RECORDING MODE