TURNING POWER ON

 

 

Turn the camera on by pressing the main switch near the shutter-release button

 

(1).

 

1

 

 

Setting to the recording mode

3

 

To capture images, slide the mode switch to the recording

 

 

 

position or viewfinder recording position (2). The lens cover

 

 

opens and at first the red indicator lamp blinks, and then the

 

 

green indicator lamp glows steadily (3). Set to the recording

 

 

position when using the LCD monitor; an image appears on

 

 

the monitor when you set to this position. Set to the viewfind-

 

 

er recording position when using the viewfinder; this position

 

 

will help conserve battery power. Using the menu button and

 

 

controller, select the drive mode from single-frame advance,

 

 

continuous advance, or movie recording. See recording section on

 

page 22 for details.

 

 

2

Recording mode (p. 22)

Viewfinder recording mode (p. 22)

Playback mode (p. 50)

Setting to the playback mode

Captured images can be viewed in the playback mode. Slide the mode switch to the playback posi- tion. Select the playback mode from single-frame, continuous advance, or movie clips (p. 50).

Setting to the setup mode

The setup mode is used to control the camera’s operation. You can access the setup mode in either the recording or playback mode (p. 64).

Turning power off

After using the camera, turn the camera off by pressing the main switch.

17