SELF-TIMER
The self-timer will delay the release of the shutter for approximately two or ten seconds after the shutter-release button is pressed. This function can be used in the single-frame advance recording mode.
When the mode is set, the indicator will be displayed at the right side on the LCD monitor (1).
With the camera on a tripod, compose the picture. Focus lock cannot be used. Press the shutter-release button all the way down to begin the countdown (2). Because focus and exposure are determined when the shutter-release button is pressed, do not stand in front of the camera when setting up a self-timer image.
During the ten second countdown, the self-timer lamp on the front of the camera (3) will start to blink slowly. The red indicator lamp (4) next to the viewfinder will glow steadily.
A few seconds before the exposure, the self-timer lamp will blink rapidly. The indicator lamp blinks slowly, and is accompanied by the operation beep. The self-timer lamp will glow
steadily just before the shutter fires. | 2 |
You can also set the self timer by pressing the down key of the controller. Press until the desired mode is displayed.
4
To stop the countdown, press the shutter-release button before exposure. Press the shutter-release button
again to restart.
3
5
5
44
RECORDING MODE
