Removing the APS Adapter | Konica Minolta F-2900 specification

REMOVING THE APS ADAPTER

1.Click on to rewind the film into the cassette.

•This step is not necessary when the auto rewind option is selected in the Preference dialog box window (p. 49).

2.Remove the APS adapter from the scanner and close the film door.

3.Close the Control Window to exit the Dimâge Scan Elite driver software.

• The driver window will close automatically after each scan if the Close Application After Scanning option was selected in the Preferences dialog box (p.21).

4.Open the APS adapter’s film chamber door and remove the cassette.

Multiple
images
scanned	can be
scanned	before
software.	closing the
• Some
	photo
	applications
can only
	acquire one
image
	at a time.

65

Image 67

Konica Minolta F-2900 instruction manual Removing the APS Adapter, Click on to rewind the film into the cassette

Contents

9224-2885-11 H-A909 Page To avoid fire or electric shock For Proper and Safe USE Monitor Other System Requirements PC AT System Requirements Macintosh Software Registration Following contents should be included in this package Table of Contents Scanner Names of Parts Scanner Setup Scsi ID Dip Switch Settings Setting the Scsi IDSetting the Scsi ID Connecting the Hardware Connecting the Scsi Cable If there are other devices in your Scsi chain… Turn the terminator power switch switch 4 to on Windows Installing the Software PC/ATClick on Cancel Windows Windows 95 Release 2 OSR2 Then click on Next Setup will begin Double-click on Installing the Software MacintoshDouble-click on Driver folder You can also click on to select an install drive A N D a R D O P E R a T I O N Launching the Software Launching the Twain Driver Windows Double click on Launching the Plug-in MacintoshLaunching the Utility Software Windows Macintosh Main window Command Window part Name of partsMain WINDOW-NAME of Parts Set the preferences as desired Setting the PreferencesClick on to accept the new preference settings Preference Dialog Box Name of parts Loading the Film Holder Loading the Negative Holder Insert slides into the slide holder emulsion side up Loading the Slide Holder Inserting the Film Holder Into the Scanner PREVIEW-SETTING Film Type Setting the Film TypeSelect 35mm from the film format Drop-down list Preview window part Name of parts Cancelling AE-Lock Setting AE-LockAUTO-EXPOSURE Lock Click on Press the Shift key AE Area LockWhile pressing down the Shift key, change the AE area Orienting the Image Rotate Click on to flip the image top to bottom FlipClick on to flip the image left-to-right Cropping Auto Cropping Magnifying or Reducing the View RGB/CMY information ScrollAPS formats C, H and P APS only Displaying Frame number APS only Image correction window part Name of parts Image Correction Tone CURVES/HISTOGRAM Changing Tone Curves by Freehand Correcting the Tone CurvesDraw the desired curve by dragging Displaying the Histogram of Each R, G, B color Correcting the HistogramClick the RGB Display button Click the desired highlight point of the image Setting the White or Black PointsSetting the White Point Double-click the White Point button Setting the Black Point Double-click the Black Point button Click the point to be changed to gray in the image Setting the Gray PointAuto setting Click the Gray Point button Image Correction BRIGHTNESS/CONTRAST/COLOR Balance Post-Correction LUT Pre-Correction Color Sample and Post-Correction Color Sample Image Correction HUE/SATURATION/LIGHTNESS Reset Image Correction Variation Correction Selecting the Correction Item Correct the image by repeating the operation in step Color Balance CorrectionBrightness & Contrast Correction Click the colour balance Saturation Correction Click on the thumbnail in the Snapshot Display Area Storing in the Snapshot Display Area temporarilyDisplaying the image stored temporarily as a preview image Image Correction Snapshot Click the Full-Screen View button Full-Screen ViewChecking the Correction Result While Lining Up Images Input the job name and click on the OK button Image Correction JOB SAVE/JOB Load Redo the Correction Loading Image Correction JobDelete the Image Correction Navigation Dialog box Name of parts Navigation Click the Navigation Start button Navigation MenuOperation item checkbox Select the setting to be deleted and click the Delete button Saving, Selecting and Deleting a Navigation Setting Utility Software Twain Driver Plug-in SoftwareFinal Scan A N N I N G a P S F I L M Launch Software Specify Film Type Set the Preferences as desired in the APS settings part Preferences APS Settings Slide the film-chamber release as shown Names of PartsLoading the APS Adapter APS Adapter Optional Inserting the APS Adapter Index Scan Index Window Names of Parts Click on to reverse the display order Click on the corner tab and drag to reach the desired size Rotating the Index FramesSelect the desired frames, then click on , or Close the Preview window to return to the Index window Preview and Image Correction Click on to scan the selected images Selecting FramesScanning the Image Click on an image to select it for scanning Click on to rewind the film into the cassette Removing the APS AdapterPage P E N D I Color Matching Color Matching in the Preference Dialog Box Name of parts Select the ICC profile according to the monitor being used When using Photoshop Ver.3.0.5 or Ver Scan Settings Scan Settings part in the Main Window Names of partsExcept the Image Correction window in the Main window Job names Enter the desired output size maximum 3 digits Deleting a Job Creating a JobCreating / Deleting JOB Files Photosensitive Scan Job Category Description CustomColor Laser Printer Category Job name Out Mag Unit Scan JOB File List 35MM Category Job Name Out Mag Scan JOB File List APS Contrast Glossary Shadows Trouble Shooting Solution 17.28 x 29.95mm 1920 x 3328 pixels SpecificationsPrescan Sec Scan 40 sec Index Scan Sec/frame Interface User Technical Support Determining the version number of your driver software