Using the Set-up Menu (Cont’d)

Setting the AE-Lock to “ON”

If you press up while activating focus lock (pressing the shutter button half-way on page 34), the exposure setting locks and the AE lock icon appears on the LCD monitor. The setting remains effective even after you take a shot.

*To cancel the AE-lock, turn the camera’s power OFF, press the Zoom, MENU/SET, or PLAY button, or change the white balance setting.

4)You can also set the sequence shooting to on or off. If you set it to on, this feature lets you take a sequence shot by holding down the

shutter button.

*If you are taking photos with the flash, make sure that the flash is fully charged before taking the next photo.

1

2

1.Select “CUSTOM” and press right. The settings screen appears. Select the desired setting with down or up, and press either right or the MENU/SET button.

2.In screen 1, select “FLASH” and press right. The flash mode settings screen appears. Select the desired mode with down or up, and press either right or the MENU/SET but- ton to change the setting. When the setting is completed, press left to return to screen 1.

3.In Screen 1, select “MACRO” and press right. The shooting mode set- tings screen appears.

108