Inserting/Removing Cards (Cont’d)

Card Removal

1. Open the battery/card cover.

2. If you gently push in on the card, the lock will release and the card will come out a little. Then carefully draw the card out.

3. Again, close the battery/card cover.

Warning

Insert or remove cards only after making sure that absolutely all power is OFF as indicated by the viewfinder LED being off.

While the card is being accessed, or an image is being processed, the LCD monitor will show “Now COPY…”, etc., and the red LED will come on.

If you open the battery/card cover while the red LED is flashing, image processing may be interrupted or hindered.

While the red LED is still lit, make sure that you DO NOT open the battery/card cover.

•When a card is inserted, it is recorded on first. (When a card is not inserted, internal memory is used for recording. However, in this case the recording image size is limited to only 640 x 480 pixels.)

•Also, it is possible to insert and use two cards simultaneously, such as an SD memory card (or multi-media card) and a Memory Stick.

In this case the card being used will be recorded on first. By using the Set-up menu, you can select which to record to first (p.105).

25