Installing software and downloading images (Cont’d)

Notes

•The camera cannot be connected to your PC if no image data is recorded on the built-in memory of the camera, or a card with an image data record is not in the camera.

•When 2 memory cards are inserted in the camera, the Memory Priority will be displayed (p.25, p.105).

•Image files can be copied to a hard disk or other media and deleted as necessary. For details, refer to the instruction manual operating system in use.

Please note that Minolta will not be responsible for any loss resulting from such operations.

•Always back up important data.

•The protect setting set with this camera is equivalent to the read-only attribute of a file.

Please note that, if the attribute of a file is changed using a PC the protect setting set with the camera will be disabled.

•Do not change the file name of image data saved on an SD Memory Card/Multi-Media Card/Memory Stick using a PC or save files other than image data taken by this camera. Images that have been altered or newly saved on an SD Memory Card/Multi-Media Card/Memory Stick using a device other than this camera will not only not play back on the camera but may cause the camera to malfunction when insert- ed.

•Do not format the SD Memory Card or Multi-Media Card or Memory Stick using a PC. Data may become damaged.

•Before editing the image files, copy them to your PC hard disk.

116