Preparing the Power Supply (Cont’d)
Installing the (supplied) Battery Pack
Before installing or changing battery packs, make sure the power is OFF (p.26), check that the LCD monitor is not lit and turn OFF all switches.
1
2
Battery level indicator
1.Open the battery/card cover by slid- ing it in the direction of the arrow.
Do not change the battery with wet hands, as there is a danger of electric shock.
2.Install the battery with the terminals facing inside the camera. After mak- ing sure the battery pack is properly installed, close the battery/card cover securely.
Make sure that the battery pack is facing the right way. If the battery pack is installed incorrectly, there is a danger of injury or contamination, or the camera may be damaged due to leakage and/or heat.
As the battery runs out of power, the battery level indicator displays the power remaining as follows:
(Remaining power is shown on the LCD monitor in two levels)
1. Fully charged
2. Power is running out; change (charge) the battery.
19