Setting Up Functions Before Taking Pictures
Setting Up White Balance (Preset : Auto White Balance)
Please set the Mode Dial at Shooting Mode ( 
) and press Menu Button to enter "Still Image" menu table.
1.Select "White Balance"
2.Five modes can be selected as follows:
( AUTO) Auto White Balance: The camera will adjust the white balance by itself. It is suggested that the user to stay with this mode unless the light environment is very
different from normal.
( 
) Daylight: For strong light environment.
( 
) Sunset: For sunset light environment.
( 
) Fluorescent: For fluorescent light environment.
( 
) Tungsten: For tungsten light environment.
3.Press Right Direction Button ( 
) to confirm the setting.
Setting Up Exposure (Preset : +0)
Safety -Notes
Please set the Mode Dial at Shooting Mode ( 
) and press Menu Button to enter "Still Image" menu table.
1.Select "Exposure"
2.Select the exposure from +2.0 to
3.Press Right Direction Button ( 
) to confirm the setting.
Note
The higher the value is, the brighter the image will be.
Under Playback Mode( 
)
Please set the Mode Dial at Playback Mode ( 
) before setting up the below functions. The TFT LCD Monitor will show the latest
captured image. Use Up( 
) and Down ( 
) Direction Buttons to select other captured images or movie clips.
24
Setting Up Functions Before Taking Pictures
Formatting An SD CardSafety Notes
Please format the new card for the first time in advance before using it.
Please set the Mode Dial at Playback Mode ( 
) and press Menu Button to enter "Play" menu table.
1.Select "Delete".
2.Select "Format".
3.Select "No" to cancel the order or select "Yes" to format the memory card.
4.Press Right Direction Button ( 
) to confirm the setting.
Formatting The Built-in Flash Memory
Make sure no memory card is inside.
1.Select "Delete".
2.Select 'Format".
3.Select "No" to cancel the order or select "Yes" to format the
4.Press Right Direction Button ( 
) to confirm the setting.
Setting Up Slide Show (Preset : 1 second)
Please set the Mode Dial at Playback Mode ( 
) and press Menu Button to enter "Play" menu table.
1.Select "Slide Show".
2.Select the time for slide show from 1 second to 9 seconds (2 seconds per step).
3.Press Right Direction Button ( 
) to start the slide show.
You can press Menu Button to cancel the slide show.
Setting An Image At Protect Status Or Cancel The Protection Of An Protected Image
Please set the Mode Dial at Playback Mode ( 
) and press Menu Button to enter "Play" menu table.
25
