Preparation For Taking Pictures

Inserting An SD Card

1.Switch off the camera.

2.Open the Battery / Memory Card Cover.

3.Insert the SD card into the card slot and press it down until you hear a click sound.

4.Close the Battery / Memory Card Cover.

Note

If a new SD card is used, you'll have to format it first. Please refer to page 18 for details.

Note

This camera is equipped with a built-in flash memory. The image(s) can be stored either in the built-in memory or in a memory card. Please note that if a memory card is not inserted, all operations will affect only the built-in flash memory. All images will be stored onto the memory card rather than the built-in flash memory.

Removing An SD Card

1.Make sure the camera is switched off.

2.Open the Battery / Memory Card Cover.

3.Press down the SD card and the card will jump up.

4.Take out the card and close the Battery / Memory Card Cover.

18

Preparation For Taking Pictures

Note

This camera comes with approximately 8 MB of memory installed, but if you would like to use additional memory, the following cards are compatible:

SD Memory Card

About the SD Memory Card

Caution

SD Memory Cards are manufactured using precision electronic components. Do not perform the following as malfunction or damage may occur as a result.

Do not touch the terminals with hands or metal objects. Damage

to the components may occur as a result of static electricity. Before handling an SD Memory Card, discharge any static build-up from your body by touching grounded metal, etc. Do not bend, drop or apply excessive force.

Avoid heat, liquid and direct sunlight when using and for storage.

Do not open the battery/card cover or remove the SD Memory Card while data is being read or written.

Do not dismantle or modify.

* The SD logo is a trademark.

19

Page 10
Image 10
Konica Minolta KD-25 user manual Preparation For Taking Pictures