2165_E.qxd 03.2.10 2:06 PM Page 14

BATTERIES

GETTING STARTED

Installing the Batteries

The camera uses two 3V CR2 lithium batteries to supply power for all camera operations.

1. Slide the battery-chamber release as shown, and open the door.

2. Insert the batteries with the polarities

as indicated by the illustration next to the battery chamber.

3. Close the battery-chamber door and push until it clicks into place.

•Setting the camera down with the battery-chamber door open may damage the camera.

•Read the for proper and safe use section (p. 5) before using batteries.

14