2165_E.qxd 03.2.10 2:06 PM Page 20

ATTACHING THE STRAP

GETTING STARTED

1.

Confirm the eyepiece cap is attached

Eyepiece cap

 

 

to the strap. The strap is threaded

 

 

 

through the cap to prevent loss.

 

 

2.

With the visible protrusions on the

Holder ring

 

 

inside of the holder ring oriented as

 

 

 

shown, pass the tip of the strap

 

 

 

through the ring.

 

 

 

 

 

Protrusions

3. Pass the tip of the strap through the camera’s strap eyelet from below.

• Attach the strap so the tip comes between the strap and the camera.

• The eyepiece cap should be on the same side of the camera as the flash mode button.

4. Pass the tip of the strap through the holder ring.

• If the ring is tight, fold the strap, and slide the holder ring over the tip (1). Hold the strap, and slide the holder ring in the direction shown (2).

1)2)

20