2165_E.qxd 03.2.10 2:06 PM Page 45

FOCUS LOCK IN REMOTE CONTROL MODE

When your subject is not centered in the focus frame, use manual focus or focus lock. Focus lock cannot be used with moving subjects or the sports subject program.

1. Set the camera to the remote-control mode.

2.Center your subject in the focus frame, then press the shutter-release button partway down until viewfinder focus signal appears.

•Focus and exposure is set for the

•Press the shutter-release button down again to reset the focus.

• Focus can also be locked with the button (p. 46).

3.Lift your finger from the shutter- release button.

•The focus signal will remain lit indicating focus lock.

4.Recompose the picture.

5.Point the remote toward the

the camera and press the release delay button.

•The focus lock will remain in effect after the picture is taken allowing multiple remote-control pictures to be made . To cancel the focus lock, select the remote-control mode again with the drive mode button.

45