2165_E.qxd 03.2.10 2:06 PM Page 22
LENS
GETTING STARTED
Attaching the Lens
This camera uses interchangeable lenses. See page 56 for information on which lenses are compatible with this camera.
1. Remove the body and rear lens caps.
2. Align the red mounting index on the lens and camera body. Carefully insert the lens into the mount, then turn it clockwise until it clicks into the locked position.
• Do not insert the lens at an angle.
• Do not press the lens release button when mounting the lens. The lens will not couple properly.
Removing the Lens
While pressing the lens release, turn the lens
• Replace the cap on the lens and attach the body cap or another lens to the camera.
•Never force the lens. If it does not fit, check its orientation with the index marks. When removing, make sure the lens release is pressed all the way down.
•Do not touch the inside of the camera, especially the lens contacts and mirror.
22