![](/images/new-backgrounds/1113880/113880219x1.webp)
7
7.4Custom Size Input
Using the Utility Mode
When nonstandard size paper is to be loaded in the 1st Tray, use this function to set the custom size.
✎
Note
Before making this setting, be sure to select “size input” for “Paper Size Detection” in the User’s Choice mode.
✎
Tip
To make sure that the correct values are entered, refer to the illustration on the right to study the convention of the paper length and width.
X (length) | Y (width) |
|
Custom Size Input Procedure (1st Tray)
1Call the Utility Mode to the Display.
❍ Calling the Utility Mode to the Display
2Making sure that
3Press the [START] key.
Konica 7115/7118 |