![](/images/new-backgrounds/1113880/113880259x1.webp)
8
|
| Error Displays and Other Indicators |
|
|
|
Error Display | Possible Cause | Action |
| A sheet of paper is left on the Manual | Remove the paper from the Manual Bypass |
| Bypass Tray. | Tray. |
|
|
|
| Copier cover is left open or not closed in | Identify the closure failure location on the |
| position. | control panel and close the cover in |
|
| position. |
|
|
|
| The Automatic Document Feeder is in a | Properly lower the Automatic Document |
| raised position. | Feeder into position. |
|
|
|
| The Document Feeder Cover (Doc. | Close the Document Feeder Cover (Doc. |
| Feed Cover) of the Automatic Document | Feed Cover) in position. |
| Feeder is open. |
|
|
|
|
| Memory is full when the image data is | Press the [AUTO RESET] key. Or, turn |
| read. | OFF, then ON, the Power Switch. (This will |
|
| erase all data that has so far been read.) |
|
|
|
| Memory is full when image data is | Press the [AUTO RESET] key. Or, turn |
| received from the personal computer. | OFF, then ON, the Power Switch. (This will |
|
| erase all image data that has so far been |
|
| received.) |
|
|
|
| A size error has occurred with the paper | Press the [CLEAR] key, slide out the tray in |
| loaded in the tray. | which the size error has occurred, and slide |
|
| it back into the copier. |
|
| Check the paper size set with Custom Size |
|
| Input and carry out the Custom Size Input |
|
| procedure once again. |
|
|
|
| The | Plug in the |
|
|
|
| The numerical value entered falls | Check the value and enter the correct one |
| outside the setting range. | as necessary. |
|
|
|
| The scheduled maintenance time has | Call your authorized Konica Service |
| arrived. | Representative. |
|
|
|
| The Imaging Unit needs replacement. | Call your authorized Konica Service |
|
| Representative. |
|
|
|
Konica 7115/7118 |