![](/images/new-backgrounds/1113880/11388045x1.webp)
Precautions
2
2 Precautions
Observe the following precautions to keep the copier in the best possible conditions.
2.1Installation Precautions
Installation site
To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements:
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A location out of the direct airflow of an air conditioner or heater, and not exposed to ex- tremely high or low temperatures
-A
-A location that is not exposed to high humidity
-A location that is not extremely dusty
-A location not subjected to undue vibrations
-A stable and level location
-A location where ammonia or other organic gases are not generated
-A location that does not put the operator in the direct airflow of exhaust from the copier
-A location that is not near any kind of heating devices
Power source
The power source requirements are as follows.
Voltage Fluctuation: Within ±10%
Frequency Fluctuation: Within ±0.3Hz
Konica 7115/7118 |