Konica Minolta Printer Copier Multiple Bypass Tray, Position the original Original Loading p.4-1

5

Making Copies

<Multiple Bypass Tray>

1Position the original.

❍ Original Loading (p.4-1)

2Adjust the Paper Guides and the Bypass Tray Extender to the size of the paper. Load a stack of paper so that the paper faces down. At this time, gently insert the paper stack until it is stopped. Note that the Bypass Tray

location indicator on the control panel lights.

?Do you want to use a type of paper other than plain paper?

➜To use cards, postcards, or OHP transparencies, first change the type of paper selecting User’s Choice. Refer to “Paper Type (Bypass Tray)” (p.7-9).

➜When loading cards or postcards, be sure to smooth out any curl in the paper.

3Press the [BYPASS TRAY SIZE SELECT] key until the

size of the paper loaded blinks.

❍ If the paper used is of custom size, its size must be input. Refer to the “Custom Size Input (Bypass Tray)” procedure that follows. (p.5-9)

? Do you know which FLS size has been set?

➜ The FLS size has been set to 210 mm × 330 mm. Ask your authorized Konica Service Representative if you want to change the FLS size.

4Press the [ENTER] key.

5Make any other necessary settings.

❍Zoom Ratio (p.5-11)

❍Image Density (p.5-16)

6Press the [START] key.

5-8 Konica 7115/7118